When a barcode will not scan at the till or the self checkout, the fault is in one of three places: the label, the scanner, or the shop's system. The beep is the clue. No beep at all usually means the scanner cannot read the bars. A beep with nothing on the screen means it read the number fine, but the till does not know that product.
Below is how to tell which one it is, whether you are the shopper, the person behind the till, or the seller whose product will not scan in a store.
Find the cause in 10 seconds
| What happens | Most likely cause | Where to look |
|---|---|---|
| No beep, other items scan fine | The label: damaged, too small, faint print, glossy or curved | The label |
| No beep for any item | The scanner: dirty window, unplugged, wrong mode | The scanner |
| Beep, but nothing appears | The number is not set up in the till, or the scanner sends it in the wrong format | The shop's system |
| "Invalid barcode" or "item not found" | A wrong check digit, or a product the store has not added | The number |
| Short 8 digit barcode fails, long ones work | The till does not expand UPC-E codes to the full 12 digits | The scanner settings |
If you are the shopper
- Flatten it. Bags of produce, bottles and crinkled packets bend the bars. Pull the wrapper tight across the barcode.
- Tilt, do not hold flat. Shiny plastic and foil reflect the scanner light straight back. A slight angle usually fixes it.
- Slow down at the self checkout. Hand scanners and flatbed windows need the whole barcode in view for a moment.
- Phone screens: turn the brightness up and hold the screen still for about three seconds.
- Still nothing? Ask staff to type the number printed under the bars. That is what it is there for.
If you work the till
- Test the scanner on a known good item. If that also fails, clean the window with a soft cloth and check the cable or battery.
- Scan into a text editor. If the number appears there but not in the till, the scanner works and the problem is the till setup.
- Search the item by its number. If it is found by typing but not by scanning, the barcode number is not attached to that product in the system. Add it once and it will scan from then on.
- Short UPC-E codes: many scanners have a setting to expand them to the full UPC-A number the till expects.
If it is your product that will not scan
Sellers hear about this from a store or a customer. The label is usually the cause, and most problems come from how it was made:
- Too small. An EAN-13 or UPC-A printed much below about 30 mm wide has bars too thin for many scanners.
- No blank margin. The white space at both ends of the bars is part of the barcode. A design that runs text or a border right up to the bars breaks it.
- Wrong colours. Scanners read with red light, so red, orange or light bars disappear. Use black or dark blue bars on white.
- Low resolution print. A worn ribbon, a home inkjet or a faint thermal label makes the bars bleed or fade.
- A wrong check digit. The last digit is calculated from the others. Type your number into the check digit calculator to make sure it is right.
- A number the store does not know. A retailer's system only recognises numbers it has been given. For retail, the number has to be a GS1 number licensed to your business: see do I need GS1 barcodes?
To check a printed label at home, photograph it and drop it into the online barcode scanner. If it reads there, the bars are fine and the problem is on the store's side.
When the barcode itself is damaged
A torn, scratched or smudged barcode can often still be read from a photo, because a scanner only needs one clean line across all the bars. The damaged barcode reader tries the photo several ways, works out a missing digit from the check digit, and draws a clean replacement label to print. The first digits also tell you which country's GS1 office issued the number: see barcode country codes.
Questions
Why does the scanner beep but nothing happens? The scanner read the barcode, but the till could not match the number to a product, or the scanner is set to send the number in a form the till does not accept. Try typing the number to see if the product exists.
Why does a barcode scan in one shop but not another? Each shop has its own product list and its own scanners. A number that one store has added, or a label that one scanner can cope with, may fail somewhere else.
Can I print my own barcode for a store? You can print the bars yourself with any barcode generator, but the number has to be one the retailer accepts, which for most stores means a GS1 number assigned to your business.
